|
|
 |
47" wingspan, 32-1/2" long, 329 sq. in. wing area, 23 oz. flying weight. Up until now, if you wanted a Mini-Telemaster, you had to build one yourself. Not any longer. Mini-Telemaster is now offered as an ARF. Airplane is pre-built and covered. The hard building has been done for you. Assembly takes only about 3 hours and consists of gluing the wing halves together, installing the tail parts to the fuselage and installing the radio equipment. The main landing gear is pre-bent wire and the tailwheel is steerable. When it comes to flying, Mini-Telemaster flies like a Telemaster. Smooth, responsive, and predictable; it still has all of the gentle handling and slow flight characteristics of the larger Telemaster airplanes. The difference is it can be flown in a much smaller area. For 3 Channels: Elevator, Rudder and Throttle.
This item is in stock.
We have 2 available.
|
|
|
|
 |
35-1/2" wingspan, 33-1/2" long, 297 sq. in. wing area, 13 oz. flying weight. Reflex is an all-wood profile 3D airplane that flies like a much larger full fuselage plane. It is solid in all maneuvers, hovers easily, knife-edges with little coupling and snaps cleanly. With this airplane the pilot is in total control. Wing loading is very light making this suitable for both indoor and outdoor flying. With reduced control throws the plane is easy enough to fly for the novice 3D flyer. With full rates the performance is only limited by the skill of the pilot. Builds quickly; the instructions are fully illustrated and step-by-step. For four channels: Ailerons (2 servos), Elevator, Rudder and Throttle. A radio with end point adjustments and exponential is recommended. For an assembled (but red) Reflex photo, click here
This item is in stock.
We have 1 available.
|
|
