Categories:
Airplanes
Batteries - PQ
Batteries - TP
Batteries - TPX
Chargers
Connectors
ESCs
Helicopter Parts
Helicopters
Motor Accessories
Motors
Servos
Supplies
Look For Gifts
under this Price:
Extras:
Motor Data Table
Company Info:
Home
About Us
Contact Us
Promotions
Shipping
Policies
|
|
|
 |
Basic programming of Advance PLUS ESCs -- choosing Brake ON or OFF and Hard or Soft timing -- can be done without the Programming Card. Detailed programming of the Jeti Advance PLUS ESC is done by using this tiny 1-1/2" x 1-1/2" Programming Card that is only 1/16" thick. Carry it in your pocket or your field box -- it has ALL the advanced programming functions in it. Just move the jumper connectors to the value you select. With the Programming card you can program or select the following:
1. Nicad and NiMH or Lithium battery,
2. Motor Cutoff Voltage,
3. Hard or Soft Cutoff,
4. Prop Brake On or Off,
5. Timing: Low for normal motors, High for Outrunners,
6. Throttle Response: Linear or Logarithmic.
This item is in stock.
We have 5 available.
|
|
|
|
 |
For 3 to 4 NiCad or 1 LiPoly cell; up to 4 amps continuous. Non-programmable controller for OUTRUNNER brushless motors that are powered by a single LiPoly cell or 3-4 cell NiCad or NiMH battery packs. Features include 8kHz switching rate, auto-calibrating of throttle endpoints, automatic motor cutoff with automatic cell type/number detection, and inrunner/outrunner operation optimization.
Dimensions/weight are 1 x 5/8 x 5/32", 6 grams (1/5 oz).
This item is currently out of stock.
Order now and get 5% off!
|
|
|
|
 |
For 6 to 8 NiCd, 2 to 3 Li-Po cells; up to 4 amps continuous and 6 amps maximum. BEC can source up to 2 amps; can run 4 servos on 2 LiPo cells and 3 servos on 3 LiPo cells. Features include 8kHz switching rate, auto-calibrating of throttle endpoints, automatic motor cutoff with automatic cell type/number detection, and inrunner/outrunner operation optimization.
Dimensions/weight are 1 x 5/8 x 3/16", 6 grams (1/5 oz).
This item is currently out of stock.
Order now and get 5% off!
|
|
|
|
 |
For 6 to 10 NiCd, 2 to 3 Li-Po cells; up to 8 amps continuous and 10 amps maximum. BEC can source up to 2 amps; can run 4 servos on 2 LiPo cells and 3 servos on 3 LiPo cells. Features include 8kHz switching rate, auto-calibrating of throttle endpoints, automatic motor cutoff with automatic cell type/number detection, and inrunner/outrunner operation optimization.
Dimensions/weight are 1-1/4 x 7/8 x 1/4", 9 grams (1/3 oz).
This item is currently out of stock.
Order now and get 5% off!
|
|
|
|